PRIMARY SERIES, ENHANCED
SERIES, AND INDUSTRIAL SERIES LED MODULES  Binay's different Module ranges offer varying levels of features, and are designed for differing applica-tions and user requirements |
| PRIMARY SERIES, ENHANCED
SERIES, AND INDUSTRIAL SERIES LED MODULES Binay's different Module ranges offer varying levels of features, and are designed for differing applica-tions and user requirements |
| Binay MODULE SERIES | |||
| ELECTRICAL AND
OPTICAL PARAMETERS |
PRIMARY SERIES | PRIMARY SERIES | PRIMARY SERIES |
| LEDs (Composition of LED chip; dimensions approximately 0.4 sq. mm.) | P-N junction composition of GaAsP, GaP, or GaN on SiC | P-N junction composition of GaP, AlGaAs, AlInGaP or GaN on SiC | P-N junction composition of GaAsP, AlGaAs, AlInGaP, or GaN on SiC |
| Light Output | 50mcd nominal; 100mcd maximum | 80mcd minimum 200mcd maximum | 100mcd minimum 200mcd maximum |
| Peak Inverse Volt-age of LED | 5 volts per LED | 5 volts per LED | 5 volts per LED |
| Current | 25mA - 30mA | 18mA - 22mA | 15mA - 18mA |
| Fuse Protection | Not provided | Not provided | In-built circuit |
| Low Voltage Glow Protection (LVGP) | Not provided | Not provided | In-built blocking LVGP circuit (25 volt) |
| Continuous over voltage capability (Designed to withstand and function at higher voltage than rated) | Up to 260V continuous, or 10% of the rated voltage | Up to 280V continuous, or 20% of the rated voltage | Up to 300V continuous, or 25% of the rated voltage |
| Ageing | Aged at 260V for 12 hours | Aged at 280V for 24 hours | Aged at 300V for 24 hours |
| Dielectric Strength | N/A | 2.5 KV | 4KV |
| Operating tempera-ture range | 45°C - 50°C | 70°C - 80°C | 70°C - 80°C |
| Power consumption |
|
|
|
| PHYSICAL PARAMETERS | |||
| Body | Fire-retardant thermoplastic material; can melt/deform if exposed to localised spot temperature over 100°C | Fire-retardant glass-filled thermosetting DMC material; will not melt/deform even at 300°C spot temperature. Un-like thermoplastic, will not degrade even after 15 years of operation. | Fire-retardant glass-filled thermosetting DMC material; will not melt/deform even at 300°C spot temperature. Un-like thermoplastic, will not degrade even after 15 years of operation. |
| Bezel/Adapter | Moulded fire-retardant ther-moplastic | Solid brass, chrome-plated | Solid brass, chrome-plated |
| Lens | Fire-retardant (UL94V2) un-breakable polycarbonate | Fire-retardant (UL94V2) unbreakable polycarbonate | Fire-retardant (UL94V2) un-breakable polycarbonate |
| Internal Protection | IP 54 (front protection) | IP 54 (front protection) IP 67 possible | IP 54 (front protection) IP 67 possible |
| Guarantee | Three years | Six years | Six years |